Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1636

show qos qsi stats
Red
Accepted-Packets
Discarded-Packets
-> show qos qsi port 1/1 qi-id 3 stats
Port 1/1
QSAP: 1, Parent:
QSI 1
QSP: 1, Name:
WRP: 1, Name:
Scheduler: Qspec, Stats-Admin: Dis, Stats-Oper: Dis
BW
Admin (%): 100, Oper (Mbps):
QI 3
Qtype: SP5, Stats-Admin: Dis, Stats-Oper: Dis
WRP:
CIR
Admin (%):
PIR
Admin (%): 100, Oper (Mbps):
Scheduler
Enqueued-Packets
Dequeued-Packets
Dropped-Packets
Green
Accepted-Packets
Discarded-Packets
Yellow
Accepted-Packets
Discarded-Packets
Red
Accepted-Packets
Discarded-Packets
output definitions
QSAP
Parent
Admin
QSI
QSP, Name, Type
WRP, Name, Admin, Oper
page 25-76
:
:
1, Admin: Ena
qsp-1, Type: Default,
wrp-1, Admin: Dis, Oper: Dis,
1, Name: wrp-1, Admin: Dis, Oper: Dis,
0, Oper (Mbps):
The QSet attachment point (QSAP) ID number. This is a logical entity
generated internally by the switch to identify the association between a
QSet instance and a port or link aggregate. The QSAP is not config-
urable at this time.
The parent QSAP ID. If the parent ID is different than the QSAP ID,
then the port is a member of a link aggregate.
The administrative status of the QSAP.
The QSet instance (QSI) ID number, internally generated by the switch.
The QSet profile (QSP) ID number and name associated with the QSI.
Configured through the
QSP, which is one of the pre-defined, default profiles (QSP 1–4) cur-
rently supported. User-configured, dynamic profiles are not supported
at this time.
The WRED profile (WRP) ID number associated with the QSet profile
that is assigned to the QSI. Configured through the
Also indicates the administrative and operational status of the WRP for
the QSI. The WRP administrative status for the QSI is configured
through the
720,
240
0
0
0
:
:
: 102
:
:
:
:
:
:
qos qsi command. Also indicates the type of
qos qsi command.
OmniSwitch CLI Reference Guide
QoS Commands
10,
8,
90,
30
90,
30
90,
30
qos qset command
March 2011