Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1625

QoS Commands
output definitions
WRP
Admin
Stats
#Ports
MTU
Min-Th
Max-Th
Max-Pb
Gain
-> show qos wred detail port 1/1
Port 1/1
QSAP: 1, Parent:
WRP: 1, Name:
QSI 1
QSP: 1, Name:
QI 1
WRP:
QI 2
WRP:
QI 3
WRP:
QI 4
WRP:
QI 5
WRP:
QI 6
WRP:
QI 7
WRP:
QI 8
WRP:
output definitions
Port
QSAP
Parent
Admin
WRP Name Admin
QSI
QSP
OmniSwitch CLI Reference Guide
The WRED profile (WRP) ID number and name.
The administrative state of the profile.
Whether or not statistics collection is enabled for the profile.
The number of ports to which this profile is attached.
The MTU size.
The minimum queue threshold percentage for red, green, and yellow
packets.
The maximum queue threshold percentage for red, green, and yellow
packets.
The maximum drop probability percentage for red, green, and yellow
packets.
The gain value to smooth out the queue (1–15).
1, Admin: Ena,
wrp-1, Admin: Dis
qsp-1
1, Name: wrp-1, Admin: Dis
1, Name: wrp-1, Admin: Dis
1, Name: wrp-1, Admin: Dis
1, Name: wrp-1, Admin: Dis
1, Name: wrp-1, Admin: Dis
1, Name: wrp-1, Admin: Dis
1, Name: wrp-1, Admin: Dis
1, Name: wrp-1, Admin: Dis
The physical slot and port number (or link aggregate ID for a logical
port).
The QSet attachment point (QSAP). This is a logical entity used inter-
nally by the switch to identify the association between a QSet instance
and a port or link aggregate. The QSAP is not configurable at this time.
The QSAP ID for the parent QSAP, if any.
The administrative status of the QSAP.
The WRED profile (WRP) ID number, name, and administrative status.
The QSet instance (QSI) ID number.
The QSet profile (QSP) ID number.
March 2011
show qos wred
page 25-65