Show Ethernet-Service - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ethernet-service

show ethernet-service
Displays configuration information for VLAN Stacking Ethernet services.
show ethernet-service [service-name service-name | svlan svlan_id]
Syntax Definitions
service-name
svlan_id
Defaults
By default, all services are displayed if a service name or SVLAN ID is not specified with this command.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Enter the name of a service to display configuration information for a specific service.
•
Enter an SVLAN ID to display configuration information for all services that are associated with a
specific SVLAN.
Examples
-> show ethernet-service
Service Name : VideoOne
SVLAN : 300
NNI(s) : 2/1, 3/2
SAP Id : 20
UNIs
CVLAN(s)
sap-profile : sap-video1
SAP Id : 30
UNIs
CVLAN(s)
sap-profile : sap-video2
Service Name : CustomerABC
SVLAN : 255
NNI(s) : 1/22
SAP Id : 10
UNIs
CVLAN(s)
sap-profile : default-sap-profile
page 34-30
The name of an existing VLAN Stacking service. Use quotes around
string if the service name contains multiple words with spaces between
them (for example, "Alcatel-Lucent Engineering").
The VLAN ID number that identifies an existing SVLAN .
: 1/1, 1/2
: 10, 20
: 1/3
: untagged, 40
: 2/10, 2/11
: 500, 600
VLAN Stacking Commands
OmniSwitch CLI Reference Guide March 2011