Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 2167

Session Management Commands
!
Recalls commands listed in the history buffer and displays them at the CLI prompt.
!{! | n}
Syntax Definitions
!
n
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
You can use the history
issue a single command from the list.
•
When you use !n or !! to recall a command in the history buffer list, you must press the Enter key to
execute the command.
Examples
-> history
1* show ip interface
2 show vlan
3 show arp
4 clear arp
->!2
show vlan
vlan type admin
-----+------+-----+-----+-----+-----+------------
1 std Ena
10 std Ena
12 std Ena
14 std Ena
30 vip Ena
40 vip Ena
4094 mcm Ena
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
Recalls the last command listed in the history buffer and displays that
command at the CLI prompt.
Identifies a single command in the history buffer by number and
displays that command at the CLI prompt.
command to list all commands in the history buffer, then use the !n syntax to
oper ip mtu name
Ena Dis 1500 VLAN 1
Ena Ena 1500 VLAN 10
Ena Ena 1500 VLAN 12
Ena Ena 1500 VLAN 14
Ena Ena 1500 VIP VLAN 30
Ena Ena 1500 VIP VLAN 40
Ena Dis 9198 MCM IPC
March 2011
!
page 41-15