Scp - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

scp

scp
Copies an existing file in a secure manner.
scp [options] user_name@remote_ip_addr:[path/]source [path/]target
scp [options] [path/]source user_name@remote_ip_addr:[path/]target
Syntax Definitions
options
user_name@remote_ip_addr:
path/
source
target
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command will prompt you to enter the admin password, and the names and the path of the files
being copied will be displayed.
•
A file may be copied to a new location; you are not required to copy a file to the same directory that
contains the original.
•
Separate the multiple directory names that are part of the path with a slash (/). Refer to the examples
below.
page 42-14
Use the '?' on the command line for a list of options.
The username along with the IP address of the remote switch.
Specifies the path containing the file to be copied and the path where the
file will be copied.
The name of the file(s) to be copied.
The new user-defined file name for the resulting file copy.
File Management Commands
OmniSwitch CLI Reference Guide March 2011