Show Policy Action - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show policy action

show policy action
Displays information about pending and applied policy actions configured on the switch.
show [applied] policy action [action_name]
Syntax Definitions
applied
action_name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Information for all policy actions displays unless action_name is specified.
Examples
-> show policy action
Action name
Commited Information Rate
Commited Burst size
Peak Information Rate
Peak Burst size
Action name
State
Disposition
Action name
State
Priority
-> show applied policy action
Action name
Commited Information Rate
Commited Burst size
Peak Information Rate
Peak Burst size
page 26-164
Indicates that only actions that have been applied should be displayed.
The name of the action for which you want to display information; or a
wildcard sequence of characters for displaying information about
actions with similar names. Use an asterisk (*) to indicate a wildcard
character.
: a1
= 10.0M,
= 5.00M,
= 20.0M,
= 5.00M
: a2
= new,
= deny
: a3
= new,
= 7,
: a1
= 10.0M,
= 5.00M,
= 20.0M,
= 5.00M
QoS Policy Commands
OmniSwitch CLI Reference Guide March 2011