Ip Load Pim - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

PIM Commands

ip load pim

Dynamically loads PIM to memory.
ip load pim
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command must be executed before PIM can run on the switch.
•
This command is supported in both IPv4 and IPv6 PIM.
•
The advanced routing image file must be loaded to flash before the feature will start to work on the
switch.
Examples
-> ip load pim
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide March 2011
ip load pim
page 23-3