Port Mirroring And Monitoring Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

The Port Mirroring and Port Monitoring features are primarily used as diagnostic tools.
The Port Mirroring feature allows you to have all the inbound and outbound traffic of an Ethernet port sent
to another port on the switch. When you enable port mirroring, the active, or "mirrored," port
transmits and receives network traffic normally and the "mirroring" port receives a copy of all transmit
and receive traffic to the active port. You can connect an RMON probe or network analysis device to the
mirroring port to see an exact duplication of traffic on the mirrored port without disrupting network traffic
to and from the mirrored port.
The Port Monitoring feature allows you to capture and examine the data traffic to and from a monitored
Ethernet port.
MIB information for the Port Mirroring commands is as follows:
Filename: AlcatelIND1portMirMon.mib
Module: ALCATEL-IND1-PORT-MIRRORING-MONITORING-MIB
The following table summarizes the available commands:
Port Mirroring Commands
Port Monitoring Commands
OmniSwitch CLI Reference Guide
31 Port Mirroring and
Monitoring Commands
port-mirroring source destination
port-mirroring
show port-mirroring status
port-monitoring source
port-monitoring
show port-monitoring status
show port-monitoring file
March 2011 page 31-1