Show Snmp-Trap Filter-Ip - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

SNMP Commands

show snmp-trap filter-ip

Displays the current SNMP trap filter status.
show snmp-trap filter-ip
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
To display a list of traps and their ID numbers, use the
Examples
-> show snmp-trap filter-ip
ipAddress
-------------------------------------------------------------------------------
199.199.101.200 :
199.199.101.201 : no filter
199.199.105.202 :
199.199.101.203 :
199.199.101.204 : no filter
output definitions
IPAddress
TrapId List
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
: trapId list
0 1 2 3
0 1 2 3
15 16 17 18
20 22 30
IP address of the SNMP management station that recorded the traps.
Identification number for the traps being filtered.
March 2011
show snmp-trap config
4 5 6 7 8
19
show snmp-trap filter-ip
command.
9 10 11 12 13 14
page 45-27