Tftp - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

tftp

tftp
Starts a TFTP client session that enables a file transfer to an TFTP server.
tftp [options] host [port]
Syntax Definitions
options
host
port
Defaults
•
If a path is not specified with the filename, the current path is used by default (for example, /flash).
•
If a local filename is not specified, the remote filename is used by default.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The OmniSwitch supports TFTP client functionality only.
•
A TFTP server has no provisions for user authentication.
•
When downloading a file to the switch, the file size must not exceed the available flash space.
Examples
-> tftp -g -l local_file -r remote_file 198.51.100.100
Release History
Release 7.1.1; command was introduced.
page 42-32
Enter a question mark (?) to get a list of options.
Specifies the IP address of the TFTP server.
Specifies the port for the TFTP transfer.
File Management Commands
OmniSwitch CLI Reference Guide March 2011