Show Policy Server Statistics - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show policy server statistics

show policy server statistics
Displays statistics about policy directory servers.
show policy server statistics
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This command displays statistics about server downloads. For information about server parameters, use
the show policy server command.
Examples
-> show policy server statistics
Server IP Address
------+--------------+-------+---------+-------+----------+-----+-------+------
1 155.132.44.98 16652
2 155.132.48.27 21890
output definitions
Server
IP Address
port
accesses
delta
successes
delta
errors
delta
page 27-10
port accesses delta
793 793
0
The index number corresponding to the server.
The IP address of the LDAP server.
The TCP/IP port number used by the switch to connect to the policy
server.
The number of times the server was polled by the switch to download
policies.
The change in the number of accesses since the last time the policy
server was accessed.
The number of times the server was polled by the switch to download
policies and the policies were successfully downloaded.
The change in the number of successful policy downloads since the last
time the policy server was accessed.
The number of errors returned by the server.
The change in the number of errors returned by the server since the last
time the policy server was accessed.
successes delta errors
295 295
0 0 0
OmniSwitch CLI Reference Guide
Policy Server Commands
delta
0 0
0 0
March 2011