Copy Running Certified - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

CMM Commands

copy running certified

Copies the current running directory configuration to the certified directory on both CMMs.
copy running certified [flash-synchro]
Syntax Definitions
flash-synchro
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command is used to overwrite the contents of the certified directory with the configuration from
the running directory. This should only be done if the running configuration has been verified.
•
The flash-synchro keyword synchronizes the files between the primary and secondary CMMs by over-
writing the contents of the secondary CMM certified directory with the contents of the primary CMM
certified directory.
•
If there is not enough free space, the copy attempt fails and an error message is generated.
•
This command does not work if the switch is running from the certified directory. To view where the
switch is running from, see the
•
This command may take up to two minutes to complete.
Examples
-> copy running certified
-> copy running certified flash-synchro
Release History
Release 7.1.1; command introduced.
Related Commands
copy flash-synchro
MIB Objects
chasControlModuleTable
chasControlVersionMngt
chasControlWorkingVersion
OmniSwitch CLI Reference Guide
Synchronizes the primary and secondary CMM.
show running-directory
Copies the startup primary flash version of the CMM software to the
startup secondary flash version of the CMM software.
March 2011
command.
copy running certified
page 37-13