Show Qos Qset - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

QoS Commands

show qos qset

Displays the QSet profile configuration for the switch.
show qos qset [qsp-id qsp_id | qsp-name qsp_name] [detail [port slot/port[-port]] | slot slot | linkagg
agg_id[-agg_id]]]
Syntax Definitions
qsp_id
qsp_name
detail
slot/port[-port]
slot
agg_id[-agg_id]
Defaults
By default, displays the configuration for all four of the QSet profiles (QSP 1–4).
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the qsq-id qse_id and qsp-name qsp_name parameters to display information for a specific
profile.
•
Use the detail parameter to display additional profile information for all ports and link aggregates in
the switch.
•
Use the port slot/port, slot slot, and linkagg agg_id parameters to display profile information associ-
ated with specific ports or link aggregates. These parameters are used in combination with the detail
parameter.
Examples
-> show qos qset qsp-id 2
QSP 2 (qsp-2)
#Ports: 0, #Queues:
WRP: 1, Name:
Scheduler: Qspec, Stats-Admin: Ena
QP 1
Qtype: EF, Stats-Admin: Ena,
WRP: 1, Name:
CIR (%):
QP 2
Qtype: SP7, Stats-Admin: Ena,
WRP: 1, Name:
OmniSwitch CLI Reference Guide
A QSet profile (QSP) ID number. The valid range is 1–4.
A QSP profile name.
Displays QSP configuration details for a port, slot, or link aggregate.
A physical slot and port number. Use a hyphen to specify a range of
ports (1/5-10).
A slot number. Displays information for all ports on the slot.
The link aggregate ID. Use a hyphen to specify a range of IDs (10-15).
8, BW (%): 100, Type: Default,
wrp-1, Admin: Ena,
wrp-1, Admin: Ena,
0, PIR (%): 20
wrp-1, Admin: Ena,
March 2011
show qos qset
page 25-67