Chapter 33 Rmon Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Remote Network Monitoring (RMON) probes can be used to monitor, manage, and compile statistical data
about network traffic from designated active ports in a LAN segment without negatively impacting
network performance. This feature supports basic RMON 4 group implementation compliant with
RFC 2819 (Remote Network Monitoring Management Information Base), but does not support RMON 10
group or RMON 2. This chapter includes descriptions of RMON commands used to enable or disable indi-
vidual (or a group of a certain flavor type) RMON probes, show a list of (or individual) RMON probes and
show a list of (or individual) RMON logged events.
MIB information for the RMON commands is as follows:
Filename: IETF_RMON.mib
Module: RMON-MIB
The following table summarizes the available commands:
rmon probes
show rmon probes
show rmon events
OmniSwitch CLI Reference Guide
33 RMON Commands
March 2011 page 33-1