Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1628

show qos qset
CIR (%):
QP 3
Qtype: SP5, Stats-Admin: Ena,
WRP: 1, Name:
CIR (%):
QP 4
Qtype: SP4, Stats-Admin: Ena,
WRP: 1, Name:
CIR (%):
QP 5
Qtype: SP3, Stats-Admin: Ena,
WRP: 1, Name:
CIR (%):
QP 6
Qtype: SP2, Stats-Admin: Ena,
WRP: 1, Name:
CIR (%):
QP 7
Qtype: SP1, Stats-Admin: Ena,
WRP: 1, Name:
CIR (%):
QP 8
Qtype: SP0, Stats-Admin: Ena,
WRP: 1, Name:
CIR (%):
output definitions
QSP
#Ports
#Queues
BW%
Type
WRP
Name
Admin
Scheduler
Stats-Admin
QP 1...8
page 25-68
0, PIR (%): 100
wrp-1, Admin: Ena,
0, PIR (%): 100
wrp-1, Admin: Ena,
0, PIR (%): 100
wrp-1, Admin: Ena,
0, PIR (%): 100
wrp-1, Admin: Ena,
0, PIR (%): 100
wrp-1, Admin: Ena,
0, PIR (%): 100
wrp-1, Admin: Ena,
0, PIR (%): 100
The QSet profile (QSP) ID number and name.
The number of ports to which this profile is attached.
The number of queues associated with this QSet. Currently there are
eight queues for each QSet.
The bandwidth percentage for the QSet. The bandwidth is shared
between all the queues.
Whether the QSP is static or dynamic. Currently there are 4 pre-
defined, static profiles (QSP 1–4). User-configured, dynamic profiles
are not supported at this time.
The WRED profile (WRP) ID number associated with the QSet.
The WRP name.
The administrative status of the WRP for this QSP.
The type of scheduler, such as queue specific priority (Qspec) or strict
priority.
The administrative status of statistics collection for the WRP.
The queue profile configuration for each QSet queue. The configura-
tion for each of the individual queue profiles is defined by the QSP in
use. For example, QSP 1 applies a different queue configuration than
QSP 2, 3, or 4.
OmniSwitch CLI Reference Guide
QoS Commands
March 2011