Show Module Status - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Chassis Management and Monitoring Commands

show module status

Displays the basic status information for either a specified module or all modules installed in a standalone
switch chassis.
show module status [slot]
Syntax Definitions
slot
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show module status
Operational
Slot Status
------+-------------+------------+---------+-----------------
CMM-A UP
SLOT-1 UP
output definitions
Slot
Operational Status
Admin-Status
Firmware Rev
MAC
OmniSwitch CLI Reference Guide
The slot number or CMM letter for a specific module installed in the
chassis. If no slot number is specified, status information for all
modules is displayed.
Firmware
Admin-Status Rev
POWER ON N/A
POWER ON N/A
The chassis slot position of the module. For detailed slot numbering
information, refer to the "Chassis and Power Supplies" chapter of the
Hardware User Guide. Refer to
on CMM callouts.
The operational status of the module. Options include UP or DOWN.
For NI and secondary CMM modules, the operational status can be
DOWN while the power status is on, indicating a possible software
issue.
The current power status of the module. Options include POWER ON
or POWER OFF.
The firmware version for module's ASICs.
For the CMM, the base chassis MAC address is displayed. For NI mod-
ules, the MAC address for the corresponding NI is displayed.
March 2011
MAC
00:d0:95:a3:e5:09
00:d0:95:a3:e5:0b
page 38-23 for additional information
show module status
page 38-31