update fpga
update fpga
Updates the fpga versions of the CMM or NIs. Refer to the Release Notes and/or any available Upgrade
Instructions for the new release before performing this type of update on the switch.
update fpga {cmm slot| ni {daughter | slot } file filename}
Syntax Definitions
cmm
daughter
slot
filename
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Note that when performing an update, it is important that the correct update file is used. Specifying the
wrong file may impact the operation of the switch.
Examples
OS10K-> update fpga ni 4 file 9999.vme
OS10K-> update fpga cmm 1 file /flash/temp/9999.vme
Release History
Release 7.1.1; command introduced.
Related Commands
reload slot
MIB Objects
systemServices
systemServicesArg1
systemServicesAction
page 38-12
Specifies that the update is performed for the Chassis Management
Module (CMM).
Specifies the number of the daughter board on the NI module.
Specifies the slot number of the module within a chassis.
Specifies the path and name of the upgrade file.
Reloads the specified NI module.
Chassis Management and Monitoring Commands
OmniSwitch CLI Reference Guide
March 2011