Session Management Commands
show session xon-xoff
Displays whether the console port is enabled or disabled for XON-XOFF.
show session xon-xoff
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The switch may interpret noise from an RS232 line as Control-S (XOFF). If the console port is enabled for
XON-XOFF (through the
Examples
-> show session xon-xoff
XON-XOFF Enabled
Release History
Release 7.1.1; command was introduced.
Related Commands
session xon-xoff
MIB Objects
sessionXonXoffEnable
OmniSwitch CLI Reference Guide
session xon-xoff
command), traffic to the console port may be stopped.
Enables/disables the XON-XOFF protocol on the console port.
March 2011
show session xon-xoff
page 41-27