Clear Violation - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Learned Port Security Commands

clear violation

Clears all the MAC address violation logs for a particular port and session.
clear violation {port slot/port[-port2] | linkagg agg_num[-agg_num2]}
Syntax Definitions
slot/port
-port2
agg_num
-agg_num2
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
When a violation is set on a physical port that is part of a link aggregate, the violation is set for the
whole link aggregate. All ports on that link aggregate is brought down. This command can be applied
to the link aggregate IDs to activate all the ports of the link aggregates.
•
If physical or link aggregate ports are simulated down, toggle the link to clear the violation.
Examples
-> clear violation port 1/10
-> clear violation linkagg 10-20
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
The slot number for the module and the physical port number on that
module (for example, 3/1 specifies port 1 on slot 3).
The last port number in a range of ports you want to configure on the
same slot (for example, 3/1-4 specifies ports 1-4 on slot 3).
Enter a link aggregate ID number.
The last aggregate ID number in a range of link aggregate ports.
March 2011
clear violation
page 30-21