Show Health - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show health configuration
output definitions
Rx Threshold
TxRx Threshold
Memory Threshold
CPU Threshold
Sampling Interval
Release History
Release 7.1.1; command introduced.
Related Commands
health threshold
health interval
MIB Objects
HealthThreshInfo
healthThreshDeviceRxLimit
healthThreshDeviceTxRxLimit
healthThreshDeviceTempLimit
healthThreshDeviceMemoryLimit
healthThreshDeviceCpuLimit
page 36-6
The current device input (RX) threshold. This value displays the maxi-
mum percentage of total bandwidth allowed for incoming traffic on the
switch. The total bandwidth is defined as the Ethernet port capacity for
all NI modules currently operating in the switch, in Mbps. For example,
a chassis with 48 100Base-T Ethernet ports installed has a total band-
width of 4800 Mbps. The default value is 80 percent and can be
changed using the health threshold
The current device output/input (TX/RX) threshold. This value dis-
plays the maximum percentage of total bandwidth allowed for all
incoming and outgoing traffic. As with the RX threshold described
above, the total bandwidth is defined as the Ethernet port capacity for
all the NI modules currently operating in the switch, in Mbps. The
default value is 80 percent and can be changed using the
health threshold command.
Displays the current memory usage threshold. Memory usage refers to
the total amount of RAM memory currently used by switch applica-
tions. The default value is 80 percent and can be changed using the
health threshold command.
Displays the current CPU usage threshold. CPU usage refers to the total
amount of CPU processor capacity currently used by switch applica-
tions. The default value is 80 percent and can be changed using the
health threshold command.
Displays the sampling interval time period in seconds. The default
value is 5 seconds. Sampling interval can be changed using the
interval command.
Configures thresholds for input traffic (RX), output/input traffic
(TX/RX), memory usage, CPU usage, and chassis temperature.
Configures the sampling interval between health statistics checks.
Health Monitoring Commands
command.
OmniSwitch CLI Reference Guide
health
March 2011