Ip Dvmrp Neighbor-Timeout - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

DVMRP Commands

ip dvmrp neighbor-timeout

Configures the neighbor timeout. This value specifies how long the switch will wait for activity from a
neighboring DVMRP router before assuming that the inactive router is down.
ip dvmrp neighbor-timeout seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> ip dvmrp neighbor-timeout 35
Release History
Release 7.1.1; command was introduced.
Related Commands
ip dvmrp neighbor-interval
show ip dvmrp neighbor
show ip dvmrp
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpNeighborTimeout
OmniSwitch CLI Reference Guide
Specifies the neighbor timeout, in seconds (5–86400).
default
35
Configures the neighbor probe interval time.
Displays the DVMRP neighbor table.
Displays the global DVMRP parameters.
March 2011
ip dvmrp neighbor-timeout
page 22-9