Ip Mroute Interface Ttl - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Multicast Routing Commands

ip mroute interface ttl

Specifies a multicast datagram Time to Live (TTL) threshold for an existing router interface. IP multicast
datagrams with a TTL value lower than the specified TTL threshold value will not be forwarded out of the
interface.
ip mroute interface if_ name ttl threshold
Syntax Definitions
if_name
threshold
Defaults
parameter
threshold
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> ip mroute interface vlan-1 ttl 255
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip mroute interface
MIB Objects
alaIpMcastInterfaceTable
alaIpMcastInterfaceIfIndex
alaIpMcastInterfaceTtl
OmniSwitch CLI Reference Guide
The interface name that has one of the Multicast routing protocols
running (either DVMRP or PIM).
The TTL threshold value. Values may range from 0–255. The default
value of 0 allows all multicast packets to be forwarded out of the inter-
face.
default
0
Displays IP multicast interface information.
March 2011
ip mroute interface ttl
page 24-5