Port-Security Port Max-Filtering - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

port-security port max-filtering

port-security port max-filtering
Configures the maximum number of MAC addresses that can be filtered on the LPS port(s).
port-security port slot/port[-port2] max-filtering number
Syntax Definitions
slot/port
-port2
number
Defaults
By default, the maximum number of filtered MAC addresses that can be learned on an LPS port is set to 5.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
When the number of filtered MAC addresses learned on the port reaches the maximum, either the port is
disabled (Shutdown Violation mode) or MAC address learning is disabled (Restrict Violation mode). By
default, MAC address learning is disabled.
Examples
-> port-security 1/10 max-filtering 6
-> port-security 1/10-13 max-filtering 18
Release History
Release 7.1.1; command introduced.
Related Commands
port-security port maximum
port-security port violation
MIB Objects
learnedPortSecurityTable
lpsMaxFilteredMacNum
page 30-8
The slot number for the module and the physical port number on that
module (for example, 3/1 specifies port 1 on slot 3).
The last port number in a range of ports you want to configure on the
same slot (for example, 3/1-4 specifies ports 1-4 on slot 3).
The maximum number of filtered MAC addresses that are allowed on
this port.
Specifies the maximum number of source MAC addresses that an LPS
port(s) is allowed to learn.
Selects the method for handling traffic that does not comply with LPS
restrictions for the specified port.
Learned Port Security Commands
OmniSwitch CLI Reference Guide March 2011