Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1912

port-security port mac-range
Examples
-> port-security port 4/20 mac-range low 00:20:95:00:fa:5c
-> port-security port 5/11-15 mac-range low 00:da:95:00:00:10 high
00:da:95:00:00:1f
-> port-security port 5/16-20 mac-range high 00:da:95:00:00:1f
-> port-security port 5/11-15 mac-range
Release History
Release 7.1.1; command introduced.
Related Commands
port-security
port-security learning-window
port-security port maximum
port-security port violation
MIB Objects
learnedPortSecurityTable
lpsLoMacRange
lpsHiMacRange
lpsRowStatus
page 30-10
Enables or disables Learned Port Security (LPS) on the switch port(s).
Configures the amount of time in minutes to allow source learning on all
LPS ports. Also, enables or disables the conversion of dynamic MAC
addresses to static MAC addresses on LPS ports.
Specifies the maximum number of source MAC addresses that an LPS
port(s) is allowed to learn.
Selects the method for handling traffic that does not comply with LPS
restrictions for the specified port.
Learned Port Security Commands
OmniSwitch CLI Reference Guide March 2011