Show Port-Monitoring Status - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show port-monitoring status

show port-monitoring status
Displays port monitoring status.
show port-monitoring status [port_monitor_sessionid]
Syntax Definitions
port_monitor_sessionid
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If a port monitoring session identifier is not specified with this command, then all port monitoring sessions
are displayed.
Examples
-> show port-monitoring status
Sess Mon. Mon. Over
Src Dir
-----+----+----+-----+------+------+-------+------+--------------------------
1. 1/2 Out
output definitions
Sess
Mon. Src
Mon Dir
Overwrite
Oper Stat
Admin Stat
Capt Type
Max Size
File Name
page 31-14
Monitoring session identifier.
Oper. Admin
write Stat Stat
OFF OFF OFF
Session - The port monitoring session identifier.
Monitor Source - The source ports that are monitored.
Monitor Direction - The direction of the monitoring session, which
can be bidirectional (the default), inport, or outport.
Whether files created by a port monitoring session can be overwritten.
The default is ON.
Operating Status - The current operating status of the port monitoring
session (on/off).
Admin Status - The current administrative status of the port monitor-
ing session (on/off).
Capture type -
Brief - captures only 64 bytes of data per traffic data packet.
Full - captures the entire packet.
Maximum Size - The maximum size of the port monitoring file.
The name of the port monitoring file.
Port Mirroring and Monitoring Commands
Capt. Max. File
Type Size Name
Brief 64K /flash/pm.enc
OmniSwitch CLI Reference Guide March 2011