Policy Action No-Cache - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

QoS Policy Commands

policy action no-cache

Disables logging of rule entries to the hardware cache.
policy action action_name no-cache
policy action action_name no no-cache
Syntax Definitions
action_name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove no cache from the policy action.
•
Recommended for use when applied to traffic going to the switch.
Examples
-> policy action nc01 no-cache
-> policy action nc01 no no-cache
Release History
Release 7.1.1; command was introduced.
Related Commands
qos apply
policy action
show policy action
MIB Objects
alaQoSActionTable
alaQoSActionName
alaQoSActionNocache
alaQoSAppliedActionTable
alaQoSAppliedActionName
alaQoSAppliedActionNocache
OmniSwitch CLI Reference Guide
The name of the action.
Applies configured QoS and policy settings to the current configuration.
Creates a policy action.
Displays information about policy actions.
March 2011
policy action no-cache
page 26-149