Show Session Config - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Session Management Commands

show session config

Displays session manager configuration information (e.g., default prompt, banner file name, inactivity
timer, login timer, and login attempts).
show session config
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the configuration commands detailed in this section to modify any of the values displayed.
Examples
-> show session config
Cli Default Prompt
Cli Banner File Name
Cli Inactivity Timer in minutes
Ftp Banner File Name
Ftp Inactivity Timer in minutes
Http Inactivity Timer in minutes = 60
Login Timer in seconds
Maximum number of Login Attempts = 2
output definitions
Cli Default Prompt
Cli Banner File Name
Cli Inactivity Timer in
minutes
Ftp Banner File Name
Ftp Inactivity Timer in
minutes
Http Inactivity Timer in
minutes
OmniSwitch CLI Reference Guide
= ->
= ,
= 60
= ,
= 60
= 60
Default prompt displayed for CLI sessions.
Name of the file that contains the banner information that will appear
during a CLI session.
Inactivity timer value (in minutes) for CLI sessions. The user is logged
off when this value is exceeded.
Name of the file that contains the banner information that will appear
during an FTP session.
Inactivity timer value (in minutes) for FTP sessions. The user is logged
off when this value is exceeded.
Inactivity timer value (in minutes) for HTTP (including WebView)
sessions. The user is logged off when this value is exceeded.
March 2011
show session config
page 41-25