Qos Flush - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

QoS Commands

qos flush

Deletes all pending policy information. This command is different from qos revert, which returns the
pending policy configuration to its last applied settings.
qos flush
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If you enter this command, the pending policy configuration is completely erased. If you then enter qos
apply, the erased configuration overwrites the applied policies and you will erase all of your policy
configuration.
Note. Do not use this command unless you want to erase all of your policy configuration and start config-
uring new policies.
•
Use the qos revert command to return the pending policy configuration to its last applied value.
•
Policy configuration includes the following commands:
base commands
policy rule
policy network group
policy service
policy service group
Examples
-> qos flush
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
policy mac group
policy port group
policy condition
policy action
March 2011
qos flush
page 25-25