Snmp Authentication-Trap - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

snmp authentication-trap

snmp authentication-trap
Enables or disables SNMP authentication failure trap forwarding.
snmp authentication-trap {enable | disable}
Syntax Definitions
enable
disable
Defaults
By default, authentication failure trap forwarding is disabled.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> snmp authentication-trap enable
-> snmp authentication-trap disable
Release History
Release 7.1.1; command was introduced.
Related Commands
show snmp authentication-trap
MIB Objects
snmpGroup
snmpEnableAuthenTraps
page 45-24
Enables authentication failure trap forwarding. When enabled, the
standard authentication failure trap is sent each time an SNMP
authentication failure is detected.
Disables authentication failure trap forwarding.
Displays the current authentication failure trap forwarding status.
OmniSwitch CLI Reference Guide
SNMP Commands
March 2011