Ip Pim Interface-Election-Notification-Period - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip pim interface-election-notification-period

ip pim interface-election-notification-period
Specifies the minimum time that must elapse between the PIM interface election notifications originated
by the router.
ip pim interface-election-notification-period seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The default value of 65535 represents an infinite time. The interface election notifications are never
sent in case of infinite time.
•
This value is used with both IPv4 and IPv6 PIM.
•
This command is supported only in the sparse mode.
Examples
-> ip pim interface-election-notification-period 100
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip pim notifications
MIB Objects
alaPim
alaPimInterfaceElectionNotificationPeriod
page 23-36
Specifies the minimum time value that must elapse between interface
election notifications, in seconds (0–65535).
default
65535
Displays the configuration of the configured notification periods as
well as information on the events triggering the notifications.
OmniSwitch CLI Reference Guide
PIM Commands
March 2011