Swlog Output Flash File-Size - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

swlog output flash file-size

swlog output flash file-size
Configures the size of the switch logging file.
swlog output flash file-size bytes
Syntax Definitions
bytes
Defaults
parameter
bytes
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the ls command to determine the amount of available flash memory.
•
This command can also be used on the secondary CMM.
Examples
-> swlog output flash file size 400000
Release History
Release 7.1.1; command was introduced.
Related Commands
swlog clear
show log swlog
show swlog
MIB Objects
systemSwitchLoggingGroup
systemSwitchLoggingFileSize
page 35-8
The size of the switch logging file.
default
128000
Clears the files that store switch logging data.
Displays stored switch logging information from flash.
Displays switch logging information.
Switch Logging Commands
OmniSwitch CLI Reference Guide March 2011