Update Uboot - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Chassis Management and Monitoring Commands

update uboot

Updates the uboot versions of the CMM or NIs. Refer to the Release Notes and/or any available Upgrade
Instructions for the new release before performing this type of update on the switch.
update uboot {cmm slot | ni {all | slot} file filename}
Syntax Definitions
cmm
all
slot
filename
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Note that when performing an update, it is important that the correct update file is used. Specifying the
wrong file may impact the operation of the switch.
Examples
OS10K-> update uboot ni all file 9999.tar.gz
OS10K-> update uboot cmm 1 file /flash/temp/9999.tar.gz
Release History
Release 7.1.1; command introduced.
Related Commands
reload slot
MIB Objects
systemServices
systemServicesArg1
systemServicesAction
OmniSwitch CLI Reference Guide
Specifies that the update is performed for the Chassis Management
Module (CMM).
Specifies that the update is performed for all slots within a chassis.
Specifies the slot number of the module within a chassis.
Specifies the path and name of the upgrade file.
Reloads the specified NI module.
March 2011
update uboot
page 38-11