VLAN Stacking Commands
Note. Spanning Tree status for an SVLAN only applies to the Spanning Tree topology
calculations for the service provider network. This status is not applied to customer VLANs (CVLANs)
and does not affect the customer network topology.
Examples
-> ethernet-service svlan 1001-1005 admin-state enable name "Customer ABC"
-> ethernet-service svlan 1001-1005 stp enable
-> no ethernet-service svlan 1001
Release History
Release 7.1.1; command introduced.
Related Commands
show ethernet-service vlan
MIB Objects
vlanTable
vlanNumber
vlanDescription
vlanType
vlanAdmStatus
vlanStatus
OmniSwitch CLI Reference Guide
Displays a list of SVLANs configured from the switch
March 2011
ethernet-service svlan
page 34-3