Port-Mapping - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

port-mapping

port-mapping
Enables, disables, or deletes a port mapping session.
port-mapping port_mapping_sessionid {enable | disable}
no port-mapping port_mapping_sessionid
Syntax Definitions
port_mapping_sessionid
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
To be enabled, a session should have a minimum of two ports.
Examples
-> port-mapping 3 enable
-> port-mapping 4 disable
-> no port-mapping 5
Release History
Release 7.1.1; command introduced.
page 29-4
The port mapping session ID.
Enables a port mapping session.
Disables a port mapping session.
default
disable
Port Mapping Commands
OmniSwitch CLI Reference Guide March 2011