Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1614

show qos port
-> show qos port 4/2
Slot/
Port Active Trust P/DSCP Classification
4/2 Yes No
output definitions
Slot/Port
Active
Trust
Default P
Default DSCP
Default Classification
Physical Bandwidth
Ingress Bandwidth
Egress Bandwidth
Type
Release History
Release 7.1.1; command was introduced.
Related Commands
qos port
MIB Objects
alcatelIND1VfcMIB
alaQoSPortTable
alaQoSPortSlot
alaQoSPortPort
alaQoSPortEnabled
alaQoSPortDefault8021p
alaQoSPortDefaultDSCP
alaQoSPortMaximumDefaultBandwidth
alaQoSPortDefaultClassification
page 25-54
Default Default
0/ 0 DSCP
The slot and physical port number.
Whether or not the port is sending/receiving QoS traffic.
Whether the port is trusted or not trusted. Configured through the
port trusted
The default 802.1p setting for the port. Configured through the
port default 802.1p
The default ToS/DSCP setting for the port. Configured through the
port default dscp
The default classification setting for the port (802.1p, ToS, or DSCP).
Configured through the
The amount of physical bandwidth available on the port.
The amount of ingress bandwidth configured for the port. Configured
through the qos port maximum ingress-bandwidth
The amount of egress bandwidth configured for the port. Configured
through the qos port maximum egress-bandwidth
The interface type, ethernet or wan.
Configures a physical port for QoS.
Bandwidth
Physical Ingress Egress
1.00G -
command.
command.
command.
qos port default classification
OmniSwitch CLI Reference Guide
QoS Commands
Type
- ethernet-1G
qos
qos
qos
command.
command.
command.
March 2011