Show Ipv6 Mroute Interface - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Multicast Routing Commands

show ipv6 mroute interface

Displays IPv6 multicast interface information.
show ipv6 mroute interface {interface_name}
Syntax Definitions
interface_name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Not specifying an interface name displays all known IPv6 multicast interfaces information.
Examples
-> show ipv6 mroute interface
Interface Name
---------------+---------------+------+--------------------
vlan-4
vlan-26
vlan-11
output definitions
Interface Name
IP Address
TTL
Multicast Protocol
Release History
Release 7.1.1; command was introduced.
Related Commands
N/A
OmniSwitch CLI Reference Guide
The name of the interface.
IP Address TTL
2000::1 0
2000::2 0
2000::3 0
The name configured for the IPv6 interface.
The IPv6 address of this interface entry.
The datagram TTL threshold for the interface. Any IPv6 multicast data-
grams with a TTL less than the threshold displayed in the table will not
be forwarded out of the interface. The default value, 0, specifies that all
multicast packets are forwarded out of the interface.
The multicast routing protocol currently running on this interface.
Options include DVMRP and PIM.
March 2011
Multicast Protocol
PIM
PIM
PIM
show ipv6 mroute interface
page 24-15