Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1643

QoS Policy Commands
Types of policies are generally determined by the kind of traffic they classify (policy conditions) and how
the policy is enforced (policy actions). Commands used for particular types of policies are listed here. See
the OmniSwitch AOS Release 7 Network Configuration Guide for more information about creating these
types of policies and information about valid condition/action combinations.
Access Control Lists
Traffic prioritization/shaping
802.1p/ToS/DSCP tagging or
mapping
Network Address Translation
(NAT)
Policy based port mirroring
VLAN Stacking
OmniSwitch CLI Reference Guide
policy condition
policy action disposition
policy rule
policy action shared
policy action priority
policy action maximum bandwidth
policy rule
policy condition tos
policy condition dscp
policy condition 802.1p
policy action tos
policy action 802.1p
policy action dscp
policy action map
policy rule
policy condition source ip
policy condition source ipv6
policy rule
policy action mirror
policy condition inner source-vlan
policy condition inner 802.1p
March 2011 page 26-3