SNMP Commands
show snmp authentication-trap
Displays the current authentication failure trap forwarding status (i.e., enable or disable).
show snmp authentication-trap
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show snmp authentication-trap
snmp authentication trap = disable
Release History
Release 7.1.1; command was introduced.
Related Commands
snmp authentication-trap
MIB Objects
sessionAuthenticationTrap
OmniSwitch CLI Reference Guide
Enables or disables SNMP authentication failure trap forwarding.
March 2011
show snmp authentication-trap
page 45-29