Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1620

show qos config
output definitions (continued)
Log console
Forward log
Stats interval
User-port filter
User-port shutdown
Debug
Pending changes
Release History
Release 7.1.1; command was introduced.
Related Commands
qos
show qos statistics
MIB Objects
alaQoSConfigTable
alaQoSConfigEnable
alaQosConfigTrustPorts
alaQoSConfigAutoPhones
alaQoSConfigLogLines
alaQoSConfigLogLevel
alaQoSConfigLogConsole
alaQoSConfigStatsInterval
alaQosConfigUserportFilter
alaQosConfigUserportShutdown
alaQosConfigDebug
page 25-60
Whether or not log messages are sent to the console. Configured
through the qos log console
Whether or not logged events are sent to the policy server software in
the switch in real time. Configured through the
mand.
How often the switch polls network interfaces for statistics about QoS
events. Configured through the
The type of traffic that is filtered on ports that are members of the User-
Ports group. Configured through the
The type of traffic that will trigger an administrative shutdown of the
port if the port is a member of the UserPorts group. Configured through
the qos user-port command.
The type of information that will be displayed in the QoS log. A value
of info indicates the default debugging type.
QoS changes not yet applied to the configuration.
Enables or disables QoS. This base command may be used with key-
word options to configure QoS globally on the switch.
Displays statistics about the QoS configuration.
command.
qos forward log
qos stats interval
qos user-port
OmniSwitch CLI Reference Guide
QoS Commands
com-
command.
command.
March 2011