Show Ip Pim Cbsr - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

PIM Commands

show ip pim cbsr

Displays the Candidate-BSR information that is used in the Bootstrap messages.
show ip pim cbsr
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show ip pim cbsr
CBSR Address
Status
CBSR Priority
Hash Mask Length
Elected BSR
Timer
output definitions
CBSR Address
Status
CBSR Priority
Hash Mask Length
Elected BSR
Timer
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
= 214.0.0.7,
= enabled,
= 0,
= 30,
= False,
= 00h:00m:00s
The 32-bit address that the local router uses to advertise itself as a Can-
didate-BSR.
The current status of this entry. The status is shown as enabled only if
the PIM-SM is globally enabled and the PIM interface is enabled.
The value for the local router as a Candidate-BSR. The higher the
value, the higher the priority.
The 32-bit mask length that is advertised in the bootstrap messages (the
length of the mask is used in the hash function when computing the
Rendezvous Point (RP) for a multicast group.
Specifies whether the local router is the elected BSR.
The time value that is remaining before the local router originates the
next bootstrap message. This value is zero if this router is not the
elected BSR.
March 2011
show ip pim cbsr
page 23-59