Ip Dvmrp Prune-Lifetime - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip dvmrp prune-lifetime

ip dvmrp prune-lifetime
Indicates the length of time a prune will be in effect—i.e., its lifetime. When the prune lifetime expires, the
interface is joined back onto the multicast delivery tree. If unwanted multicast datagrams continue to
arrive, the prune mechanism will be re-initiated and the cycle will continue.
ip dvmrp prune-lifetime seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> ip dvmrp prune-lifetime 7200
Release History
Release 7.1.1; command was introduced.
Related Commands
ip dvmrp prune-timeout
show ip dvmrp prune
show ip dvmrp
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpPruneLifetime
page 22-10
Specifies the prune lifetime, in seconds (180–86400).
default
7200
Configures the prune packet retransmission value.
Displays DVMRP prune entries, including the router's upstream
prune state.
Displays the global DVMRP parameters.
OmniSwitch CLI Reference Guide
DVMRP Commands
March 2011