Show Ethernet-Service - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

VLAN Stacking Commands

show ethernet-service

Displays configuration information for a VLAN Stacking service port.
show ethernet-service port {slot/port | linkagg linkagg_id}
Syntax Definitions
slot/port
linkagg_id
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Specifying a slot/port or link aggregate ID number is required with this command.
Examples
-> show ethernet-service port 1/10
Interface : 1/10
Port Type : UNI
UNI Profile
Default SVLAN : 4095
Service Name : svlan_service
SVLAN : 20
NNI(s) : No NNIs configured
SAP Id : 1
UNIs
CVLAN(s)
sap-profile : translate_profile
OmniSwitch CLI Reference Guide
The slot number for the module and the physical port number on that
module (for example, 3/1 specifies port 1 on slot 3).
The link aggregate ID number.
: default-uni-profile
: 1/10
: 200
March 2011
show ethernet-service
page 34-35