Port-Mapping [Unidirectional | Bidirectional] - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

port-mapping [unidirectional | bidirectional]

port-mapping [unidirectional | bidirectional]
Configures the direction of a port mapping session.
port-mapping port_mapping_sessionid [unidirectional | bidirectional]
Syntax Definitions
port_mapping_sessionid
unidirectional
bidirectional
Defaults
parameter
enable | disable
unidirectional | bidirectional
Platform Supported
OmniSwitch 10K
Usage Guidelines
•
In the bidirectional mode, the network ports of a session cannot communicate with each other. Also,
the network ports of that session cannot be a part of a network port set of another session.
•
In the unidirectional mode, the network ports of a session can communicate with each other. Also, the
network ports of that session can be part of a network port set of another session that is in the
unidirectional mode.
•
To change the directional mode of an active session with network ports, delete the network ports of the
session, change the direction, and recreate the network ports.
Examples
-> port-mapping 5 enable unidirectional
-> port-mapping 5 disable unidirectional
-> port-mapping 6 enable bidirectional
-> port-mapping 5 disable bidirectional
Release History
Release 7.1.1; command introduced.
page 29-6
The port mapping session ID.
Specifies unidirectional port mapping.
Specifies bidirectional port mapping.
default
enable
bidirectional
Port Mapping Commands
OmniSwitch CLI Reference Guide March 2011