Policy Action Redirect Linkagg - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Omniswitch series
Table of Contents

Advertisement

QoS Policy Commands

policy action redirect linkagg

Redirects all traffic (flooded, bridged, routed, and multicast) matching a redirect policy to the specified
link aggregate ID instead of the link aggregate to which the traffic was destined.
policy action action_name redirect linkagg link_agg
policy action action_name no redirect linkagg
Syntax Definitions
action_name
link_agg
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of this command to remove redirect linkagg from the policy action.
When redirecting routed traffic from VLAN A to VLAN B, the redirect link aggregate ID must belong
to VLAN B (tagged or default VLAN).
Routed packets (from VLAN A to VLAN B) are not modified after they are redirected; the source and
MAC address remain the same. In addition, if the redirect link aggregate ID is tagged, the redirected
packets will have a tag from the ingress VLAN A.
If a route exists for the redirected flow, then redirected packets are the final post-routing packets.
If a route does not exist for the redirected flow, the flow is not redirected to the specified link aggre-
gate ID and is "blackholed". As soon as a route is available, the flow is then redirected as specified in
the policy.
In most cases, a redirected flow will not trigger an update to the routing and ARP tables. If necessary,
create a static route for the flow or assign the redirect port or link aggregate ID to the ingress VLAN
(VLAN A) to send packets to the redirect port until a route is available.
When redirecting bridged traffic on VLAN A, the redirect port or link aggregate ID must belong to
VLAN A (tagged or default VLAN).
Examples
-> policy action rp01 redirect port 1/12
-> policy action rp01 no redirect port
OmniSwitch CLI Reference Guide
The name of the action.
The link aggregate ID number (0–32) to assign to the specified VLAN.
See
Chapter 12, "Link Aggregation Commands."
March 2011
policy action redirect linkagg
page 26-147

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 10k

Table of Contents