Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 2118

ntp server
•
An authentication key is composed of a 32-bit integer and 32-byte string of characters. The integer
format is hexadecimal. For an NTP message to be authenticated the NTP client authentication key
must match the key configured at the NTP server. This means the authentication keys must be distrib-
uted in advance of configuring the NTP client. If authentication is disabled but authentication key is
present, the association will still be unauthenticated.
•
Use the version keyword to set the correct version of NTP.
•
Use the minpoll keyword to set the minimum poll time for the server. This number is determined by
raising 2 to the power of the number entered. Therefore, if 4 were entered, the minimum poll time
would be 16 seconds (2
is exceeded.
Examples
-> ntp server 1.1.1.1
-> ntp server spartacus
-> ntp server 1.1.1.1 key 1
-> ntp server 1.1.1.1 version 4
-> ntp server spartacus minpoll 5
-> no ntp server 1.1.1.1
Release History
Release 7.1.1; command was introduced.
Related Commands
ntp client
MIB Objects
alaNtpConfig
alaNtpPeerAddressType
alaNtpPeerType
alaNtpPeerAuth
alaNtpPeerMinpoll
alaNtpPeerVersion
alaNtpPeerPrefer
alaNtpPeerAddress
page 40-4
4
= 16). The client will poll the server for a time update when the minpoll time
Enables or disables NTP operation on the switch.
Network Time Protocol Commands
OmniSwitch CLI Reference Guide March 2011