Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1811

QoS Policy Commands
-> show applied policy rule
Rule name
Condition name
Action name
output definitions
Rule name
State
Condition name
Action name
Release History
Release 7.1.1; command was introduced.
Related Commands
policy rule
MIB Objects
alaQoSRuleTable
alaQoSRuleName
alaQoSRuleEnabled
alaQoSRuleSource
alaQoSRulePrecedence
alaQoSRuleActive
alaQoSRuleReflexive
alaQosRuleLog
alaQosRuleTrapEvents
alaQosRuleSave
alaQoSRuleCondition
alaQoSRuleAction
OmniSwitch CLI Reference Guide
: r1
= c1,
= a1
The name of the policy rule, configured through the
mand.
This field appears if the rule was created or modified but not yet
applied to the QoS configuration. When the qos apply command is
issued, this field no longer displays.
The name of the condition configured for this rule.
The name of the action configured for this rule.
Configures a policy rule on the switch. A rule is made up of a condition
(for classifying incoming traffic) and an action (to be applied to outgo-
ing traffic).
March 2011
show policy rule
policy rule com-
page 26-171