Ethernet-Service Svlan Nni - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Omniswitch series
Table of Contents

Advertisement

ethernet-service svlan nni

ethernet-service svlan nni
Configures the switch port as a VLAN Stacking Network Network Interface (NNI) and associates the port
with a customer SVLAN or normal SVLAN. A network port connects to another provider bridge and
carries both customer and provider traffic.
ethernet-service svlan {svlan_id [-svlan_id2]} nni {port slot/port[-port2] | linkagg linkagg_id
[-linkagg_id2]}
no ethernet-service svlan {svlan_id [-svlan_id2]} nni {port slot/port[-port2] | linkagg linkagg_id
[-linkagg_id2]}
Syntax Definitions
svlan_id
[-svlan_id2]
slot/port
-port2
linkagg_id
linkagg_id2
Defaults
NA
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the no form of this command to remove an association between an NNI port and an SVLAN. Note
that when the last SVLAN association is removed, the NNI port reverts to become a conventional
switch port.
Only fixed ports can be configured as NNI ports.
Only SVLAN IDs are accepted with this command. This SVLAN ID specified must already exist in the
switch configuration.
When this command is used, the default VLAN for the NNI port is changed to a VLAN reserved by the
switch for applications such as VLAN Stacking. The reserved VLAN cannot be configured using
standard VLAN management commands.
page 34-8
The VLAN ID number identifying the SVLAN .
The last VLAN ID number in a range of SVLANs that you want to
specify (for example 10-12 specifies VLANs 10, 11, and 12).
The slot number for the module and the physical port number of a NNI
port on that module (for example, 3/1 specifies port 1 on slot 3).
The last port number in a range of ports that you want to configure on
the same slot of a NNI port (for example, 3/1-4 specifies ports 1, 2, 3,
and 4 on slot 3).
The link aggregate ID number of a linkagg associated to a NNI.
The last link aggregate ID number associated to a NNI in a range of
aggregates that you want to configure.
VLAN Stacking Commands
OmniSwitch CLI Reference Guide
March 2011

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 10k

Table of Contents