Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1917

Learned Port Security Commands
Examples
-> show port-security
Port: 7/10
Operation Mode
Max MAC bridged
Trap Threshold
Max MAC filtered :
Low MAC Range
High MAC Range
Violation
MAC Address
-------------------+------+------------+------------
00:20:95:00:fa:5c
output definitions
Port
Operation Mode
Max MAC bridged
Trap Threshold
Max MAC filtered
Low MAC Range
High MAC Range
Violation
MAC Address
VLAN
MAC TYPE
OmniSwitch CLI Reference Guide
: ENABLED,
:
: DISABLED,
: 00:00:00:00:00:00,
: ff:ff:ff:ff:ff:ff,
: RESTRICT
VLAN MAC TYPE
1 STATIC
The module slot number and the physical port number on that module.
The Learned Port Security operation status for the port (enabled or
disabled). Configured through the
The maximum number of bridged MAC addresses that are allowed on
this port. Configured through the
mand.
The number of bridged MACs to learn before sending a trap. After this
number is reached, a trap is sent out for every MAC learned thereafter.
If disabled is displayed in this field, the trap threshold is not in force.
Configured through the
command.
The maximum number of filtered MAC addresses that the LPS port can
learn. Configured through the
command.
MAC address that defines the lower end of a MAC address range.
Configured through the
MAC address that defines the higher end of a MAC address range.
Configured through the
The security violation mode for the port (restrict or shutdown).
Configured through the
The MAC address learned dynamically or configured statically on the
switch.
The VLAN to which the LPS port belongs.
Indicates if the MAC address was dynamically learned or statically
configured as an authorized MAC address for the port. Dynamic MAC
addresses become configured MAC address entries when we save the
configuration and reboot the switch.
March 2011
1,
5,
OPERATION
ENABLED
port-security
port-security port maximum
port-security port learn-trap-threshold
port-security port max-filtering
port-security port mac-range
port-security port mac-range
port-security port violation
show port-security
command.
com-
command.
command.
command.
page 30-15