Ntp Max-Associations - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Network Time Protocol Commands

ntp max-associations

Configures the maximum number of associations on the switch.
ntp max-associations {number}
Syntax Definitions
number
Defaults
By default, 32 associations are allowed on the switch.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use this command to restrict the number of client/server and peer association.
•
The command can be used to change the default value of 32 to any value between 0 to 64.
•
The command protects the switch from overwhelming with the NTP requests. When the limit is
reached, trap is sent to indicate the switch.
Examples
-> ntp max-associations 20
Release History
Release 7.1.1; command was introduced.
Related Commands
show ntp status
MIB Objects
alaNtpConfig
alaNtpMaxAssociation
OmniSwitch CLI Reference Guide
Maximum no of client/server and peer associations. Integer value rang-
ing from 0 to 64.
Displays current NTP status.
March 2011
ntp max-associations
page 40-17