Ip Dvmrp Neighbor-Interval - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip dvmrp neighbor-interval

ip dvmrp neighbor-interval
Configures the neighbor probe interval time. The neighbor probe interval time specifies how often probes
are transmitted on DVMRP-enabled interfaces.
ip dvmrp neighbor-interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> ip dvmrp neighbor-interval 10
Release History
Release 7.1.1; command was introduced.
Related Commands
ip dvmrp neighbor-timeout
show ip dvmrp neighbor
show ip dvmrp
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpNeighborProbeInterval
page 22-8
Specifies the probe interval time, in seconds (5–30).
default
10
Configures the neighbor timeout.
Displays the DVMRP neighbor table.
Displays the global DVMRP parameters.
OmniSwitch CLI Reference Guide
DVMRP Commands
March 2011